Ensemble Designs BrightEye 11-HD HD/SD SDI to Analog Converter

Ensemble Designs BrightEye 11-HD HD/SD SDI to Analog Converter

BrightEye 11-HD provides HD or SD digital to analog video conversion with the full range of analog output formats available for HD and SD. When an HD input is present HD RGB or YPrPb are output. When an SD input is present Beta, SMPTE, RGB or composite with simultaneous Y/C is output.

Key Features

• Use with HD or SD Monitors, VTRs and Projectors
• SD SDI Input
• Analog Composite Output
• Component, S-Video Output
• 12 Bit Processing
• Passes Embedded Audio

Technical Specifications

Serial Digital Input
Number One
Type
HD Serial Digital 1.485 Gb/s, SMPTE 274M, 292M or 296M or SD Serial Digital 270 Mb/s, SMPTE 259M
Impedance 75 U
Return Loss >15 dB
Max Cable Length 100 meters for HD 300 meters for SD (Belden 1694A)
Automatic Input Cable Equalization
HD Standards Supported:1080i (SMPTE 274M -4,5,6) 50, 59.94 or 60 Hz720p (SMPTE 296M -1,2,3) 50, 59.94 or 60 Hz1080p (SMPTE 274M -9,10,11) 23.98, 24, 25 Hz1080sF (RP211 -14,15,16) 23.98, 24, 25 Hz
Analog Output
HD input yields HD analog out,
SD input yields SD analog out
Number One component or one composite and one Y/C
Type Beta/SMPTE, Y, Pr, Pb RGB, NTSC, PAL Composite NTSC, PAL S-Video
Return Loss
>40 dB
Output
DC None (AC coupled)
Serial Digital Output
Number One
Type Follows input
Impedance
75 U
Return Loss
>15 dB
Max Cable Length
100 meters for HD
300 meters for SD
(Belden 1694A)
SDI to Analog Performance
Bit Resolution 12 bit output reconstruction
8 x oversampling
Signal to Noise >65 dB
Frequency Response -0.1 dB, 0 to 5.5 MHz
K Factor <1%
ScH Phase Error <-2 degrees
Differential Phase <1 degree
Differential Gain <1%
Size
5.63" W x 0.8" H x 5.98" D (143 mm x 21 mm x 152 mm)
including connectors and flange
Weight
1 lb 12 oz
Power 12 volts, 7 watts (100-230 VAC modular power supply)
Temperature Range
0 to 40 C ambient (all specs met)
Relative Humidity
0 to 95%, non-condensing
Altitude
0 to 10,000 ft.